Setting up DHCP pools for the 3 networks below:

192.168.0.0-7 /29
192.168.0.8-15 /29
192.168.0.16-47 /27

I set the pools up for the first two /29 networks and are assigned to the correct range of IP's but when I setup the pool for the /27 network it sets the pool range at 192.168.0.1 - 192.168.0.30. Any idea's?

Router-1(dhcp-config)#do sh ip dhcp pool


Pool Management:
Utilization mark (high/low) : 100 / 0
Subnet size (first/next) : 0 / 0
Total addresses : 6
Leased addresses : 4
Excluded addresses : 3
Pending event : none


1 subnet is currently in the pool
Current index IP address range Leased/Excluded/Total
192.168.0.1 192.168.0.1 - 192.168.0.6 4 / 3 / 6


Pool Marketing:
Utilization mark (high/low) : 100 / 0
Subnet size (first/next) : 0 / 0
Total addresses : 6
Leased addresses : 2
Excluded addresses : 3
Pending event : none


1 subnet is currently in the pool
Current index IP address range Leased/Excluded/Total
192.168.0.9 192.168.0.9 - 192.168.0.14 2 / 3 / 6


Pool Sales:
Utilization mark (high/low) : 100 / 0
Subnet size (first/next) : 0 / 0
Total addresses : 30
Leased addresses : 0
Excluded addresses : 3
Pending event : none


1 subnet is currently in the pool
Current index IP address range Leased/Excluded/Total
192.168.0.1 192.168.0.1 - 192.168.0.30 0 / 3 / 30